Description

Venom Automotive 1JZ & 2JZ Alternator Support Bracket to reinforce the lower alternator tab on the 1JZ-GTE, 2JZ-GE, and GTE blocks. These tabs commonly break off from fatigue or overtightening during alternator installation.

This bracket will reinforce unbroken tabs as a precaution against failure or assist in supporting the alternator where the original mounting point has broken off (as pictured). Please note that we recommend that the block tab be tack-welded in place to evenly support the alternator mounting face.

Compatible with Mid & Rear Sump Arrangements. Not Compatible with Front Sump Engines.

Finish

CNC Billet 6061 Aluminium - Black or Clear Anodised

Included

-1x JZA80 Billet Alternator Support Mount

-1x M10 Nut

-2x M8 High Tensile Bolts.

-1x 125mm M10 Stainless Steel Threaded Stud

Installation Tips

1. Remove Alternator as per the Toyota Supra Repair Manual (TSRM)

2. Remove the existing lower block stud (if it has not already been broken off), this can be removed by using vise-grips in an anti-clockwise direction.

3. Remove 2x bolts from the sump to enable installation of the support bracket

4. Install 2x M8 Bolts to 50% thread depth

5. Install the replacement M10 threaded stud to the full depth of the support bracket. We have machined an Allen key head into the end of the stud, which should be visible from the front once installed.

6. If the Block tab has been broken off and/or welded previously, it may be twisted out of alignment. In this case, we recommend drilling out the original hole with an 11mm drill bit to create space for the stud to pass through to the adaptor.

7. Tighten 2x M8 Bolts from Step 5.

8. Reinstall the Alternator as per TSRM.